FLATS: cold-drawn flat steel from 4 x 2 to 500 x 40 mm (thickness up to 100 mm.)
SQUARES: from 3 x 3 to 150 x 150 mm (over 150 x 150 up to 250 x 250 mm also milled)
ROUNDS: from 2 to 160 mm (also peeled-reeled over 30 mm)
HEXAGONS: from 4 to 100 mm
ANGLES: cold-drawn steel angles from 10 x 10 x 2 to 100 x 100 x 10 mm
“L” SECTIONS: from 25 x 15 x 3 to 100 x 50 x 10 mm
“T” SECTIONS: from 20 x 20 x 3 to 79 x 79 x 9 mm (on request)
AVAILABLE PROFILES
SPECIFICATIONS
CHEMICAL COMPOSITION (EN 10277-2:2008)
| C% | Si% | Mn% | P% | S% | N% | Cu% | |
|---|---|---|---|---|---|---|---|
| Min | – | – | – | – | – | – | – |
| Max | 0.17 | – | 1.40 | 0.040 | 0.040 | 0.012 | 0.55 |
COLD-DRAWN MECHANICAL PROPERTIES +C (EN 10277-2:2008)
| Spessore – Thickness mm. | Rp0,2 min. N/mm2 | Rm (MinMax) N/mm2 | A% Min |
|---|---|---|---|
| ≥5≤10 | 355 | 470840 | 8 |
| >10≤16 | 300 | 420770 | 9 |
| >16≤40 | 260 | 390730 | 10 |
| >40≤63 | 235 | 380670 | 11 |
| >63≤100 | 215 | 360640 | 11 |
You can download and examine our pdf catalog, which contains our technical information and data.