EN 10025-2 Standard
W.NR.: 10070/E360
Non-Alloy Steel For Structural Purposes
Heat analysis according to the EN 10025-2 standard
| C % | Si % | Mn % | P % | S % | N % | Cu % | |
| From | – | – | – | – | – | – | – |
| To | – | – | – | 0,045 | 0,045 | 0,012 | – |
According to the UNI 10233-3 standard
| Thickness mm | Cold Drawn | ||
| ( +C ) | |||
| Rp0,2 minimum | Rm minimum | A5 % | |
| (MPa) | (MPa) | ||
| ≤5 | 745 | 880 ÷ 1.180 | 5 |
| >5≤10 | 670 | 835 ÷ 1.130 | 5 |
| >10≤16 | 560 | 785 ÷ 1.080 | 6 |
| >16≤25 | 520 | 785 ÷ 1.030 | 6 |
| >25≤40 | 450 | 735 ÷ 980 | 7 |
| >40≤80 | 370 | 715 ÷ 960 | 8 |
| >80 | – | – | – |
* Delivery condition: as rolled.
Weldability:
Failing any prescriptions concerning chemical composition, no technical data about this steel weldability are available.
Notes:
CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication):
| EN 10025-2:04 | EN 10025:90 | UNI 7070 | DIN 17 100 | NF A35-501 |
| E360 | Fe 690-2 | Fe 690 | St 70-2 | A 70-2 |