EN 10277-5 Standard
W.NR.: 1.1181/C35E
Non-Alloy Special Steel
Heat analysis according to the EN 10277-5 standard
| C % | Si % | Mn % | P % | S % | Cr % | Ni % | Mo % | Cr+Mo+Ni % | |
| From | 0,32 | – | 0,50 | – | – | – | – | – | – |
| To | 0,39 | 0,40 | 0,80 | 0,030 | 0,035 | 0,40 | 0,40 | 0,10 | 0,63 |
According to the EN 10277-2 standard
| Thickness mm | Rolled + Peeled Rolled ( +SH ) | Cold Drawn ( +C ) | |||
| Hardness HB | Rm (MPa) | Rp0,2 minimum | Rm (MPa) | A5 % | |
| (MPa) | Minimo | ||||
| ≥5≤10 | 510 | da 650 a 1000 | 6 | ||
| >10≤16 | 420 | da 600 a 950 | 7 | ||
| >16≤40 | da 154 a 207 | da 520 a 700 | 320 | da 580 a 880 | 8 |
| >40≤63 | da 154 a 207 | da 520 a 700 | 300 | da 550 a 840 | 9 |
| >63≤100 | da 154 a 207 | da 520 a 700 | 270 | da 520 a 800 | 9 |
* Delivery condition: as rolled.
Improved machinability:
In order to improve its machinability, this steel grade can be supplied upon request with Pb (lead) addition, for example Pb=0,15%÷0,35%
Weldability:
It can be welded quite well without any precautions.
Hardenability:
Low hardenability; core quenching in water till a diameter of 12-15 mm; as far as bigger diameters are concerned, it hardens only till a certain depth, inversely proportional to diameter, like all non-alloy steels with medium-high carbon content.
Notes:
CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication):
| UNI 7845 | DIN 17200 | ISO 683-1 | AISI-SAE | AFNOR 35-552 |
| C35 | C35 | C35 | 1035 | AF55C35 |